What does self-install do?

  • Updated

For Instruments with serial numbers MBT2020 and later, self-install:

  • Checks for leaks for channel 5, the priming reservoir.
  • Pressurizes all five channels to 8 PSI for 10 minutes.
  • After ~1 minute, turns on UV light and checks for functionality.
  • After ~1 minute, turns on the High Voltage Board and checks for functionality.
  • Stops if any errors are reported.
  • If 10 minutes elapses without errors, it exits and creates a log file.
Share this article:

Was this article helpful?

2 out of 3 found this helpful

Have more questions? Submit a request